← All posts

TikTok LIVE audio delay? Fix it in this order

Your voice lands a beat after your lips move, or the game sound trails the gameplay. On TikTok LIVE that’s almost always one of three things: a Bluetooth mic, a capture card adding its own delay, or a mic that’s faster than your camera and needs an offset. Check them in that order, because the first one is the cheapest to rule out.

One thing this post doesn’t cover: viewers seeing you a few seconds behind real time. That’s the trip from you to TikTok to their phone, and every stream has it. This is about sound and picture not matching each other.

Find out which delay you have

Look at the gap before you change anything. Open your LIVE on a second phone as a viewer. Put headphones on that phone so it doesn’t feed back into your mic. Then clap once on camera.

  • You hear the clap after the hands meet: your audio is late. Start with step 1.
  • You hear the clap before the hands meet: your video is late. Go to step 3.
  • Your voice is fine, but the game sound doesn’t match the gameplay: it’s the capture card. Go to step 2.

Note roughly how far off it is. You’ll use that later.

1. Swap the Bluetooth mic for a wired one

Bluetooth adds its own delay before LIVE Studio ever gets the sound. No setting in the app can take that delay back out. TikTok’s own microphone setup starts with plugging the mic into your computer with a cable.

To add a wired mic in LIVE Studio, click the audio mixer button in the control bar. In the Microphones section, click Add. Choose the mic under Microphone device, then click Add again.

Wireless headphones that you only listen through are a smaller problem, since you’re the only one who hears that lag. If your stream audio comes from the headset’s mic, though, replace it.

2. Capture card: stop hearing your game late

If your voice is in sync and the game isn’t, the capture card is the slow part.

In LIVE Studio, the capture card source has three audio settings: Audio capture, Audio parameter and Audio output mode. TikTok’s help page doesn’t list a buffering or offset option for this source. I couldn’t confirm one exists, so I won’t send you looking for it.

What you can change is how you hear the game:

  • Capture audio only sends the sound to viewers without playing it on your PC.
  • Output audio (DirectSound) and Output audio (WaveOut) also play the sound back to you, after the card has captured it.

If you’re playing by ear through one of the output modes, you’re hearing your own game late. That makes the delay feel worse than it is for viewers. Set the source to Capture audio only and listen from somewhere that gets the console’s sound directly, such as the TV.

If you capture the card in OBS instead, the Video Capture Device source has a Buffering setting. OBS’s docs say Disable can help when the device is delayed. Enable helps when the picture stutters, so you’re trading one problem for the other. Change it, then run the clap test again.

3. Mic ahead of the camera: set an audio offset

A webcam needs time to process each frame. A USB mic barely does. So your voice gets to the stream first and your face catches up later. Both arrive on time, they just take different routes. The fix is to delay the mic until the picture catches up.

In LIVE Studio, Audio offset is one of the microphone’s settings in the audio mixer, next to Volume and Noise suppression. TikTok describes it as the setting to use when your voice and video don’t line up. Their page doesn’t give a range or say which way the numbers move. Change it in small steps and repeat the clap test after each one. Stop when the clap and the sound land together.

In OBS, the same setting is called Sync Offset. Open Edit > Advanced Audio Properties and set it in milliseconds on your mic’s row.

This catches a lot of people in OBS: audio monitoring doesn’t include the offset. You add 200 ms and listen in your headphones. You hear no change, so you keep adding more. The offset only applies to the stream and to recordings. Check it with a test recording or the second phone, not your own headphones. I couldn’t confirm whether LIVE Studio’s audio monitoring works the same way, so use the second phone there too.

Still out of sync?

  • The gap grows during the stream. An offset fixes a gap that stays the same size. If you start in sync and drift apart over an hour, no single number will hold. Note when the drift starts and which source drifts before you touch any settings.
  • You go live from your phone. I couldn’t find an offset setting for phone LIVE in TikTok’s help pages. That leaves the Bluetooth check: use the phone’s built-in mic or a wired one.
  • You hear yourself twice. That’s echo, not delay, and the causes are different. There’s a separate post on it on the blog.

Fix the slow part first, then offset whatever gap is left. If you do it the other way round, you’ll redo the offset every time you change your gear.