Run your console’s HDMI into the card and connect the card to your PC. Then, in LIVE Studio, click Add source > Capture card and pick the card under Video device. TikTok’s help article stops at the settings and has no troubleshooting section, so the black screens and missing devices are covered below, in the order I’d check them.
This is for LIVE Studio as of November 2026. The fixes name Elgato cards because Elgato’s pages spell them out. On another brand, the LIVE Studio steps stay the same, but check your card’s manual for the USB and signal details.
1. Wire the card first
Your console’s HDMI output goes to the card’s HDMI In. To play on a TV or monitor, run a second HDMI cable from the card’s HDMI Out to that screen. Elgato says this passthrough adds no delay to what you see.
The card then connects to your PC by USB or PCIe, depending on the type. On a Switch 2, the cable comes from the dock’s HDMI output, not the console.
2. Add the source and set the video
Under the scene you’re using, click Add source, then Capture card. TikTok’s article lists these fields:
- Video device: your card, from the drop-down.
- Resolution: one that gives viewers a smooth, clear picture.
- FPS: higher is smoother.
- Video format: whatever your card supports.
- Color range: TikTok says it’s usually All.
- Color space: TikTok’s example is 709 for standard HD.
Then set the console to the resolution you want to capture. Elgato gives these paths:
- PS5: Settings > Screen and Video > Video Output.
- Xbox Series X: Settings > General > TV & display options, and match the refresh rate too.
- Switch 2: System Settings > Display > TV Resolution.
3. Pick the audio mode by where you listen
Set Audio capture to the signal from your card. Don’t capture keeps the console’s sound out of your LIVE, so if viewers hear no game audio, look there first.
Audio output mode then decides who hears it:
- Capture audio only: only viewers hear it through LIVE Studio. Use this if you listen on the TV through HDMI Out.
- Output audio (DirectSound): you and your viewers hear it, through your LIVE and speakers. Use this if the PC is where you listen.
- Output audio (WaveOut): the same result using WaveOut. TikTok doesn’t say when to prefer it, so treat it as the backup.
An output mode plus a TV that’s also playing the game means you hear it twice. If it’s already doing that, the audio echo checklist goes further.
4. Black screen on a PS5: turn HDCP off
Elgato calls this the most frequent issue on PlayStation 5. HDCP is a copy protection signal, and it blocks capture.
Go to Settings > System > HDMI and turn off Enable HDCP. Elgato says the PS5 has to be connected directly to a TV or monitor while you change it, not through the card. It also says turning it off doesn’t affect gameplay.
The PS5 and Elgato setup has the full walk-through. On other consoles, Elgato says Xbox Series X needs no toggle for most content, and Switch 2 needs no HDCP setting, so move to the next check.
5. Black screen on anything else: USB port, then cable
Elgato’s numbers: the 4K S needs USB 3.0 (5 Gbps), and the 4K X needs USB 3.2 Gen 2 (10 Gbps) for full performance. Elgato also says USB 2.0 ports don’t have enough bandwidth. Use a port wired directly to the motherboard rather than a hub, if you can.
Then swap the HDMI cables. On a 4K X at high refresh rates, confirm the cable is HDMI 2.1. A bad cable looks exactly like a software problem until you replace it.
6. Card missing from Video device
TikTok’s article and the Elgato pages I could open don’t cover this symptom. These are Microsoft’s checks for cameras, so treat them as checks rather than a diagnosis.
First, close anything that could be holding the card, like OBS, Elgato’s software or a video call. Microsoft suggests looking in Task Manager for apps using the camera and ending them.
Next, open Device Manager and look under Cameras, Imaging devices, and Sound, video and game controllers. If the card isn’t there, open the Action menu and choose Scan for hardware changes.
If the card is listed as a camera, go to Start > Settings > Privacy & security > Camera. Make sure Camera access is on. Then turn on Let desktop apps access your camera, which Microsoft says applies to apps not installed from the Microsoft Store.
7. No signal from a Switch 2
Elgato’s order for this one:
- Set the card’s EDID mode to Display. On Windows that’s in 4K Capture Utility, and on a Mac it’s in Elgato Studio.
- On the Switch 2, turn off the 120 Hz output setting, Auto Low-Latency Mode (ALLM) and Match TV power state.
- Try a different HDMI cable.
- Power-cycle the console and reconnect it: Switch 2 to dock, then dock to card to PC.
I couldn’t open Elgato’s guide for the original Switch, so I can’t confirm its steps. Check the setup page for your card.
8. Picture works but looks washed out
That’s usually HDR. Elgato says HDR footage can look flat, dull or overly bright when it’s sent to a standard screen.
The simplest fix is to turn HDR off in the console’s display settings. On a Switch 2, that’s System Settings > Display > HDR Output.
Some cards convert HDR to standard video on board. Elgato lists the 4K X, HD60 X, HD60 S+, Neo, 4K Pro and 4K60 Pro MK.2. The 4K60 S+ and the 4K60 Pro MK.1 don’t, so the console setting matters more on those.
Still nothing?
Test the card outside LIVE Studio. Open it in OBS or Elgato Studio, which Elgato recommends for capture, then close that app again so it isn’t holding the card.
If there’s no picture there either, the problem is the console, cable, card or port. If there is a picture, the problem is on the LIVE Studio side, and the PC troubleshooting order is the next stop.
On a Mac, TikTok’s article doesn’t separate its steps by system, and I couldn’t confirm this screen there. The Windows checks in step 6 won’t apply either way.